E3 Check If All Steps Have Been Completed

E3 CHECK TO SEE IF ALL STEPS HAVE BEEN COMPLETED

- This step requires that a valid diagnostic trouble code has been obtained, ALL prior diagnostic steps have been completed, and the affected wiring integrity has been verified.

CAUTION: IF the above is not complete, chances are that the replacement of this or any other system component without specific direction will not, in most circumstances, resolve the concern and will consequently result in customer dissatisfaction.

Have all prior diagnostic steps been completed as described above?

> Yes
Replace the ABS control module. Go to Pinpoint Test E4. E4 Check For DTC Repeatability

> No
Go to the last diagnostic step completed and continue.