G3 Check If All Steps Have Been Completed

G3 CHECK IF ALL THE STEPS HAVE BEEN COMPLETED

- This step requires that a valid diagnostic trouble code has been obtained, ALL prior diagnostic steps have been completed, and the affected wiring integrity has been verified.

CAUTION: If not complete, chances are that replace of this or any other system component without specific direction will not, in most circumstance, resolve the concern and will consequently result in customer dissatisfaction.

Have all prior diagnostic steps been completed as described above?

> Yes
Replace the ABS control module. Go to Pinpoint Test G4. G4 Check For DTC Repeatability

> No
Go to the last diagnostic step completed and continue.