N10 Check If All Steps Have Been Completed

N10 CHECK IF ALL STEPS HAVE BEEN COMPLETED

- This step requires that a valid diagnostic trouble code has been obtained, ALL prior diagnostic steps have been completed, and the affected wiring integrity has been verified.

Have all prior diagnostic steps been completed as described?

> Yes
Replace the sensor. Go to Pinpoint Test N11 for system verification. N11 Check For DTC Repeatability

If no resolution, replace the ABS control module. Go to Pinpoint Test N11 for system verification. N11 Check For DTC Repeatability

> No
Go to the last diagnostic step completed and continue.