Rear Brakes - Grab/Stick On First Few Applications

Article No.
98-5A-36

03/18/98

BRAKES - GRABBING AND/OR STICKING DURING
FIRST FEW BRAKE APPLICATIONS AFTER A
RAINFALL AND/OR WHEN BRAKES ARE COLD

LIGHT TRUCK:
1983-97 RANGER
1991-94 EXPLORER

ISSUE:
A grabbing and/or sticking condition during the first few brake applications when the brakes are cold or in the morning after an overnight rain may occur on some vehicles. This may be caused by rear brake lining material that is sensitive to humidity.

ACTION:
Install new design rear brake linings that are made from material that is less sensitive to humidity. Refer to the following Service Procedure for details.

SERVICE PROCEDURE

1. Remove the rear brake shoes. Refer to the appropriate Explorer/Ranger Service Manual, Section 06-02, for removal procedure.

2. Clean the brake assembly and drums.

3. Install new rear brake shoe and lining assemblies per the Parts Block. Refer to the Service Manual, Section 06-02, for installation procedure.

4. Adjust the brakes according to the Service Manual.

PART NUMBER PART NAME

F77Z-2200-AA Brake Kit (1995-97, 9" Drum)
F77Z-2200-BA Brake Kit (1995-97, 10" Drum)
F77Z-2200-CA Brake Kit (1983-94, 9" Drum)
F77Z-2200-DA Brake Kit (1983-94, 10" Drum)

OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 97-14-16
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage For 1993-97 Models, Basic Warranty Coverage For All Other Models

OPERATION DESCRIPTION TIME

985A36A Replace Rear Brake Shoes 1.0 Hr.

DEALER CODING
CONDITION
BASIC PART NO. CODE
2200 69

OASIS CODES: 301000, 702000, 702200