Transmission Engagements

1. Verify that MODE switch is in DRIVE position.
2. Turn GEAR SELECT dial to 1.
3. Start engine.
4. Shift vehicle from PARK to REVERSE.
- Did vehicle shift into REVERSE?
- Was engagement firm?

5. Depress EPC switch. Line pressure should drop to idle pressure.

While holding EPC switch down, shift vehicle from PARK to REVERSE.
- Did vehicle shift into REVERSE?
- Was engagement smooth?
- Shift vehicle from REVERSE to PARK.
- Release EPC switch. Line pressure should rise to MAX pressure.

6. Shift vehicle from PARK to DRIVE.
- Did vehicle shift into DRIVE?
- Was engagement firm?

7. Shift vehicle from DRIVE to PARK.
8. Depress EPC switch. Pressure should drop to idle pressure.
9. While holing EPC switch down, shift vehicle from PARK to DRIVE.
- Did the vehicle shift from PARK to DRIVE?
- Was the engagement smooth?

10. Release EPC Switch.