Ignition Switch: Service and Repair
REMOVAL1. Disconnect battery negative cable.
2. Remove attaching screws (2) and instrument panel steering column cover.
3. Remove attaching screws (4) and instrument panel reinforcement plate.
4. If equipped with an automatic transmission, remove PRND12 indicator cable attaching screw.
5. Remove steering column to brake pedal support bracket attaching screws (2).
6. Lower column until steering wheel rests on driver's seat.
7. Remove ignition switch attaching screws.
8. Disconnect wiring and remove ignition switch.
INSTALLATION
To install ignition switch, reverse removal procedure.