EGR Backpressure Transducer: Service and Repair

EGR Backpresure Transducer, 3.0L (2V) Engine:

REMOVAL and INSTALLATION
1. Disconnect engine control sensor wiring from EGR backpressure transducer.
2. Disconnect EGR backpressure transducer hoses from EGR valve to exhaust manifold tube.
3. Remove retaining nuts or bolts (depending upon application) and EGR backpressure transducer.
4. To install, reverse Removal procedure. Tighten retaining nuts or bolts (depending upon application) to 5-7 Nm (45-61 lb in).