Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the logical successor to CHARM, I recommend you try it!

Link: lemon-manuals.la

Cylinder Head Assembly

Tightening Specifications

Head Bolts
Install NEW cylinder head retaining bolts and tighten in sequence in four steps:
Step 1: Tighten to 70-90 Nm (52-66 ft. lbs.).
Step 2: Back off all bolts 360 degrees.
Step 3: Tighten to 45-55 Nm (34-40 ft. lbs.).
Step 4: Tighten to 85-99 Nm (63-73 ft. lbs.).

* Over the entire cylinder head gasket surface.