Crankshaft, Engine

Main Bearing Journal Diameter 63.983-64.003 mm (2.5190-2.198 inch)
Out-of-Round Limit 0.008 mm (0.0003 inch)
Taper Limit 0.06 mm (0.0003 inch) 0.06 mm (0.0006 inch) Total 0.013 mm (0.0003 inch) per 25 mm (1 inch)
Journal Runout Limit 0.08 mm (0.002 inch)
Surface Finish (RMS) 0.25 micrometers (10.0 micro inch)
Thrust Bearing Journal Length 25.775-25.825 mm (1.0148-1.067 inch)
Connecting Rod Journal:
Diameter 53.983-54.003 mm (2.1253-2.1261 inch)
Out-of Round Limit 0.006 mm (0.0003 inch) Max. 0.015 mm (0.0006 inch) Total
Taper Limit 0.008 mm per 25 mm (0.0003 inch per inch)
Surface Limit (RMS) 0.25 Micrometers
Main Bearing Thrust Face Surface Finish (RMS) 0.4 Micrometers Front and Rear
Runout Limit 0.025 mm (0.001 inch)
Crankshaft Endplay 0.10-0.20 mm (0.004-0.008 inch)