Crankshaft

GENERAL SPECIFICATIONS
Main Journal
Diameter
Standard 63.983-64.003 mm (2.5190-2.5198 inch)
0.25 mm (0.010 inch) Undersize 63.963-63.983 mm (2.5182-2.5190 inch)
Out-of-Round Limit 0.03 mm (0.0012 inch)
Taper Limit 0.016 mm (0.0006 inch)
Runout 0.05 mm (0.002 inch)
Connecting Rod Journal
Diameter
Standard 58.682-58.702 mm (2.3103-2.3111 inch)
0.25 mm (0.010 inch) Undersize 58.662-58.682 mm (2.3095-2.3103 inch)
0.50 mm (0.020 inch) Undersize 58.632-58.652 mm (2.3083-2.3091 inch)
Taper Limit 0.016 (0.0006 inch)
Out-of-Round Limit 0.030 mm (0.0012 inch)
Crankshaft End Play 0.007-0.20 mm (0.00003-0.00787 inch)