Intake Manifold
| Upper Intake Manifold Bolts Due to slightly thicker side gasket bead material, the center bolts (#1 and #2) in the lower intake manifold must first be installed and hand tightened. Drawing down these bolts first, will facilitate installation of the other bolts. | Stage 1 | 8-11.5 Nm (71-101 in.lb) |
| Stage 2 | Additional 90° | |
| Lower Intake Manifold Bolts | Stage 1 | 5 Nm (44 in.lb) |
| Stage 2 | 8-11.5 Nm (71-101 in.lb) |