Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1998 >> Econoline E250 3/4 Ton V6-4.2L VIN 2 >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.





2. Pull the steering column opening cover off the lower instrument panel.





3. Disconnect the wiring harness from the ignition switch.

NOTE: For clarity, the driver side knee brace and the steering column opening reinforcement are not shown in the illustration. It is not necessary to remove these items to remove the ignition switch.





4. Remove the ignition switch screws and the ignition switch.

INSTALLATION





1. Follow the removal procedures in reverse order.

NOTE: When the battery has been disconnected and reconnected, some abnormal drive symptoms may occur while the powertrain control module relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.


pro multis · About Operation CHARM