Fuel Pressure Control Module: Service and Repair

Fuel Tank Lockring Wrench:

Special Tools Recommended

REMOVAL

WARNING: DO NOT SMOKE OR CARRY AN OPEN FLAME OF ANY TYPE WHEN WORKING ON OR NEAR ANY FUEL-RELATED COMPONENTS. DO NOT WORK ON FUEL-RELATED COMPONENTS WHEN THE ENGINE IS HOT. LEAKING FUEL MAY CONTACT HOT ENGINE COMPONENTS AND BE IGNITED, RESULTING IN POSSIBLE PERSONAL INJURY.







1. Disconnect the battery ground cable.
2. Relieve the fuel pressure.
3. Remove the rear seat cushion assembly.







4. Disconnect the two fuel delivery module electrical connectors.







5. Remove the four fuel delivery module access cover screws and remove the fuel delivery module access cover.







6. Disconnect the fuel delivery module electrical connector.







7. Remove the fuel line clip and disconnect the fuel line.






8. Use Fuel Tank Locking Wrench to remove the fuel delivery module locking retainer ring.







INSTALLATION
1. To install, reverse the removal procedure.

NOTE:
- When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
- Install a new fuel pump mounting gasket. Replace the fuel line clips if necessary.