Power Seat Track

REMOVAL
1. Remove the front seat.
2. Place the seat on a clean workbench.







3. Remove the safety belt slide bar.
1 Remove the nut.
2 Remove the bolt.
3 Remove the safety belt slide bar.







4. Disconnect the seat track wiring harness electrical connectors.
^ Disconnect the seat module electrical connectors.
^ Disconnect the seat track motor electrical connectors.







5. Remove the seat track.
1 Remove the bolts.
2 Remove the seat track.

INSTALLATION












1. To install, reverse the removal procedure.

NOTE: When installing the power seat track, start at the corner with the round hole and work around the seat base in a horseshoe patter.