Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
60/40 Split Bench W/Out Built-In Child Safety Seat
REMOVALNOTE: 60 percent rear seat without built in child safety seat shown; 40 percent rear seat similar.
1. Remove the rear outboard nut and bolt.
2. Remove the rear seat riser to floor nuts.
NOTE: Remove the plastic caps on the nuts.
3. Fold the rear seat down.
4. Remove the rear seat.
^ Pivot the seat to unhook the tab from the safety belt buckle bracket.
INSTALLATION
1. To install, reverse the removal procedure.