Rear

REMOVAL
1. Remove the rear disc brake caliper.

NOTE: When removing the rear disc brake rotor in this procedure it is necessary to disconnect the hydraulic lines.





2. Remove the rear disc brake rotor.

NOTE: If the rear disc brake rotor binds on the rear parking brake shoe and linings, remove the adjustment hole access plug and contract the parking brake shoe and lining.





3. Measure the rear disc brake rotor, and resurface as necessary. Replace the rear disc brake rotor if beyond specification.

CAUTION: Use a hub-mount brake lathe if necessary to machine the rear disc brake rotor

INSTALLATION
1. Follow the removal procedure in reverse order.