Alternator Brush: Service and Repair

REMOVAL
1. Remove the generator.







2. Remove the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
1. Remove the screws.
2. Remove the (A) generator brush and terminal holder and (B) voltage regulator assembly.

INSTALLATION







1. Install the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
1. Depress the (C) brushes and insert a (D) wire to hold brushes during installation.
2. Install the (A) generator brush and terminal holder and the (B) voltage regulator assembly.
3. Install the screws and remove the (D) wire.
2. Install the generator.