Front

REMOVAL

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING OF AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE REAR JACK STORAGE AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

NOTE: Place the four wheel drive in NORMAL.

1. Raise and support the vehicle.





2. Disconnect the electrical connector and gently pull the electrical connector harness from the frame and apron to separate the push-in fasteners.





3. Release the spring clip and pull the lower end of the height sensor from the lower ball stud bracket.





4. Release the spring clip and pull the upper end of the sensor from the upper ball stud bracket.

INSTALLATION
1. To install, reverse the removal procedure.