Rear Door Window Motor

REMOVAL
1. Raise the rear door window glass to the full up position.
2. Remove the rear door trim panel.







3. Remove the power window motor.
1 Remove the two nuts.
2 Disconnect the electrical connector.
3 Remove the power window motor.

WARNING: PRIOR TO POWER WINDOW MOTOR REMOVAL, ENSURE THE REGULATOR ARMS ARE IN A FIXED POSITION TO PREVENT COUNTERBALANCE SPRING UNWIND. FAILURE TO PLACE THE REGULATOR ARMS IN A FIXED POSITION CAN CAUSE THE SPRING TO SUDDENLY RELEASE RESULTING IN PERSONAL INJURY.

INSTALLATION







1. To install, reverse the removal procedure.
- Cycle the door glass to ensure engagement of the drive mechanism.