Rear Door Window Regulator: Service and Repair

Heavy Duty Riverter:

SPECIAL TOOLS

REMOVAL
1. Remove the rear door trim panel.







2. Disconnect the interior rear door handle from the rear door.
1 Remove the screws.
2 Disconnect the inside rear door handle.







3. Disconnect the rod from the inside rear door handle.
4. Support the rear door window glass.







5. If equipped, disconnect the power window electrical connector.







6. Drill out the window regulator rivets.







7. Remove the rear door window regulator.
- Slide the regulator arms off of the window glass track.

INSTALLATION







1. To install, reverse the removal procedure.
- Use Heavy Duty Riveter to install the new rivets.
- Cycle the door glass to ensure engagement of the drive mechanism.