Cruise Control Servo: Service and Repair

REMOVAL
1. Remove the speed control actuator cable.







2. Disconnect the battery ground cable.







3. Disconnect the speed control servo electrical connector.







4. Remove the speed control servo and bracket.
1. Remove the bolts.
2. Remove the speed control servo and bracket.







5. Remove the speed control servo bracket.
1. Remove the screws.
2. Remove the speed control servo bracket.












INSTALLATION
1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.