Crankshaft

GENERAL SPECIFICATIONS
Main Journal Diameter
Standard 63.983-64.004 mm (2.5190-2.5198 in.)
0.25mm (0.010in) Undersize 63.963-63.983 mm (2.5182-2.5190 in.)
Out-of-Round Limit 0.03 mm (0.0012 in.)
Taper Limit 0.016 mm (0.0006 in.)
Runout 0.05 mm (0.002 in.)
Connecting Rod Journal
Standard 58.682-58.702 mm (2.3103-2.3111 in.)
0.25mm (0.010 in) Undersize 58.662-58.682 mm (2.3095-2.3103 in.)
0.50mm (0.20in) Undersize 58.632-58.652 mm (2.3803-2.3091 in.)
Taper Limit 0.016 mm (0.0006 in.)
Out-of-Round Limit 0.030 mm (0.0012 in.)
Crankshaft End Play 0.007-0.20 mm (0.00003-0.00787 in.)