Wiper Switch: Service and Repair

REMOVAL
1. Remove the ignition switch lock cylinder.





2. If equipped, twist the tilt wheel handle and shank and remove.

NOTE: The steering wheel has been removed for clarity.





3. Remove the upper and lower steering column shrouds.
(1) Remove the three screws.
(2) Remove the lower steering column shroud.
(3) Remove the upper steering column shroud.





4. Remove the multi-function switch.
(1) Remove the two screws.
(2) Disconnect the electrical connectors.
(3) Remove the multi-function switch.

INSTALLATION





1. To install, reverse the removal procedure.