Crankshaft

Main Bearing Journal Diameter 63.983-64.003 mm (2.5190-2.5198 In.)
Out-of-Round Limit 0.008 mm (0.0003 In.)
Taper Limit [1] 0.06 mm (0.0006 In.)
Journal Runout Limit:
(1) 0.05 mm (0.002 In.)
(2) 0.05 mm (0.002 In.)
Surface Finish (RMS) 0.25 Micrometers (10.0 Micro In.)

Thrust Bearing Journal
Length 25.775-25.825 mm (1.0148-1.067 In.)

Connecting Rod Journal
Diameter 53.983-54.003 mm (2.1253-2.1261 In.)
Out-of-Round Limit
Max. 0.006 mm (0.0003 In.)
Total 0.0150 mm (0.0006 In.)
Taper Limit 0.008 mm per 25 mm (0.0003 In. per In.)
Surface Limit (RMS) 0.25 Micrometers (10.0 Micro In.)

Main Bearing Thrust Face
Surface Finish (RMS) [2] 0.4 Micrometers (0.157 Micro In.)
Runout Limit 0.025 mm (0.001 In.)
Flywheel Ring Gear Lateral Runout (T.I.R.):
Automatic Transmission 1.778 mm (0.07 In.)
Crankshaft End Play 0.10-0.20 mm (0.004-0.008 In.)

[1] Total, 0.013 mm (0.0003 In.) per 25 mm (1 In.)
[2] Front and Rear
(1) Runout of journals II and III to journals I and IV.
(2) Runout of adjacent journals to each other.