Cylinder Block Assembly

Head Gasket Surface Flatness [1] 0.08 mm (0.003 in.)
Head Gasket Surface Finish (RMS) 1.0-3.3 Micrometers
Camshaft Bore Inside Diameter
No.1: 54.688-54.713 mm (2.1531-2.1541 In.)
No.2: 54.188-54.213 mm (2.1334-2.1344 In.)
No.3: 54.188-54.213 mm (2.1334-2.1344 In.)
No.4: 54.688-54.713 mm (2.1531-2.1541 In.)
Cylinder Bore
Diameter 89.00 mm (3.504 in.)
Surface Finish (RMS) 0.45-0.96
Out-of-Round Limit 0.025 mm (0.001 In.)
Out-of-Round Service Limit 0.050 mm (0.002 In.)
Taper Service Limit 0.050 mm (0.002 In.)
Main Bearing Bore 68.905 mm (2.713 In.)
Diameter 68.885 mm (2.712 In.)

[1] in 152.0 mm (6.00 In.)