Crankshaft Main Bearing

TORQUE SPECIFICATIONS
Clearance to Crankshaft
Desired 0.25-0.035 mm (0.001-0.0014 In.)
Allowable 0.020-0.066 mm (0.0005-0.0023 In.)
Bearing Wall Thickness (Std.)
1st and 2nd 2.444-2.481 mm
3rd and Rear 2.491-2.427 mm

GENERAL SPECIFICATIONS
Main Bearing Caps Bolts 75-85 Nm (55-62 ft. lbs.)

Note: Tighten the bolts in pairs.