Crankshaft

GENERAL SPECIFICATIONS
Main Bearing Journal
Diameter 63.983-64.003 mm (2.5190-2.5198 inches)
Out-of-Round Limit 0.008 mm (0.0003 inches)
Taper Limit 0.06 mm (0.0006 inches) Total/ 0.013 mm (0.0003 inches) per 25 mm (1 inch)
Journal Runout Limit 0.05 mm (0.002 inches)
Surface Finish (RMS) 0.25 Micrometers (10.0 Micro inches)
Thrust Bearing Journal
Length 25.775-25.825 mm (1.0148-1.067 inches)
Connecting Rod Journal
Diameter 53.983-54.003 mm (2.1253-2.1261 inches)
Out-of-Round Limit 0.006 mm (0.0003 inches) Max./ 0.015 mm (0.0006 inches) Total
Taper Limit 0.008 mm per 25 mm (0.0003 inches per inch)
Surface Limit (RMS) 0.25 Micrometers
Main Bearing Thrust Face
Surface Finish (RMS) 0.4 Micrometers
Runout Limit 0.025 mm (0.001 inches)
Crankshaft End Play 0.10-0.20 mm (0.004-0.008 inches)