Lifter / Lash Adjuster, Valve

GENERAL SPECIFICATIONS
Diameter (Std.) 22.206 mm (0.874 inches)
Clearance to Bore 0.018-0.069 mm (0.0007-0.0027 inches)
Service Limit 0.127 mm (0.005 inches)
Hydraulic Leakdown Rate a
Collapsed Tappet Gap (Nominal)
Intake 2.23-4.77 mm (0.088-0.189 inches)
Exhaust 2.23-4.77 mm (0.088-0.189 inches)

TORQUE SPECIFICATIONS
Valve Tappet Guide Plate to Cylinder Block 10-14 Nm (8-10 Ft. Lbs.)

a. 20-200 seconds to leakdown 3.18 mm (0.125 inches) with 225 Newtons (50 pounds) load and tappet filled with leak-down fluid