Keyless Entry Remote Transmitter

NOTE: The remote entry features will not function when the ignition switch is in the RUN or ACC position.

- The remote keyless entry system includes a three-button (hand-held) keyless entry remote transmitter. Keyless entry remote transmitters are reprogrammable and all keyless entry remote transmitters for the vehicle must be set at the same time. When troubleshooting the vehicle, one keyless entry remote transmitter is essential to perform tests.
- The remote anti-theft personality module erases all previous transmitters from memory when the transmitters are programmed or reprogrammed. The remote anti-theft personality module can store up to four transmitters in memory.
- To unlock the driver door and turn on interior lamp, press the UNLOCK button on the keyless entry remote transmitter (which is programmed into the remote anti-theft personality module) once. This will also disarm the anti-theft system.
- To unlock all doors and liftgate, press the UNLOCK button on the keyless entry remote transmitter twice. The second press must be within five seconds of the first UNLOCK press.
- If more than five seconds have elapsed since the first press of the UNLOCK button, pressing the UNLOCK button again will only unlock the driver door.
- To lock all doors, press LOCK button on the keyless entry remote transmitter once. This will also arm the anti-theft system.
- To confirm that doors have locked, press LOCK button again within five seconds of the first press. This will sound the horn and lock all doors again.
- To activate the personal security alarm, press the PANIC button. The horn will sound and exterior lamps will flash for a maximum of two minutes and 45 seconds.
- To deactivate the personal security alarm, press the PANIC button again or turn the ignition switch to RUN.