Pre-Hoisting/Jacking Instructions

CAUTION
- Do not allow the adapters to contact the halfshafts or front wheel driveshaft and joints, steering linkage, suspension arms or stabilizer bar, or to compress the lower suspension arm stabilizer bar insulators. Damage to suspension, exhaust and/or steering linkage components may occur if care is not exercised when positioning the hoist adapters of two-post hoists prior to lifting the vehicle.
- Under no circumstances should the vehicle ever be lifted by the front or rear control arms, halfshafts or front wheel driveshaft and joints. Severe damage to the vehicle could result.

If a two-post hoist is used to lift a front-wheel drive vehicle, place adapters under front body rail, behind the suspension arm-to-body bracket.