Transmission Position Sensor/Switch: Adjustments

1. Remove nut securing manual control lever to Transmission Range (TR) sensor.
2. Turn manual control lever to NEUTRAL position.
3. Loosen two TR sensor retaining bolts.
4. Align TR slots using Transmission Range (TR) Sensor (MLPS) Alignment Tool T92P-70010-AH.
5. Tighten retaining bolts to 9-12 Nm (80-106 inch lbs.).
6. Install nut retaining manual control lever to TR sensor and tighten to 16-22 Nm (12-16 ft. lbs.).