Power

REMOVAL

NOTE: Both optional power rear quarter windows are activated by a direct drive electric motor.

1. Disconnect the battery ground cable.
2. Remove the rear quarter trim panel.
3. Disconnect the power rear quarter window motor electrical connector.
4. Remove the three power rear quarter window motor bracket retaining screws.
5. Remove the power rear quarter window motor assembly from the vehicle.
6. Separate latch from bracket attached to glass by lifting up on retaining tab and pulling latch forward.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten screws to 10-14 Nm (89-123 Lb-In).