Front Manual

REMOVAL

WARNING:
^ ALWAYS WEAR SAFETY GLASSES WHEN REPAIRING AN AIR BAG SUPPLEMENTAL RESTRAINT SYSTEM (SRS) VEHICLE AND WHEN HANDLING AN AIR BAG MODULE. THIS WILL REDUCE THE RISK OF INJURY IN THE EVENT OF AN ACCIDENTAL DEPLOYMENT.
^ AFTER DEPLOYMENT, THE AIR BAG SURFACE CAN CONTAIN DEPOSITS OF SODIUM HYDROXIDE, A PRODUCT OF THE GAS GENERANT COMBUSTION THAT IS IRRITATING TO THE SKIN. WASH YOUR HANDS WITH SOAP AND WATER AFTERWARD.

CAUTION: Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result in damaged components.

1. Remove the front seat.

NOTE: Be sure to read and follow all air bag warnings.

2. Place the front seat upside-down on a clean workbench.







3. Remove the safety belt buckle slide bar.
1. Remove the nut.
2. Remove the bolt.
3. Remove the safety belt buckle slide bar.







4. Remove the seat track to seat cushion front bolts.







5. Remove the front seat track.
1. Remove the seat track to seat cushion rear bolts.
2. Remove the front seat track.

INSTALLATION







1. Install the front seat track front bolts.
1. Position the front seat track.
2. Install the inboard bolt.
3. Install the outboard bolt.







2. Install the front seat track rear bolts.
1. Install the inboard bolt.
2. Install the outboard bolt.







3. Install the safety belt buckle slide bar.
1 Position the safety belt buckle slide bar.
2 Install the nut.
3 Install the bolt.
4. Install the front seat.

NOTE: Be sure to read and follow all air bag warnings.

5. Check the restraint system for proper operation.
6. If equipped, prove out the air bag system.