Cruise Control Servo Cable: Adjustments

1. Remove the speed control actuator cable clip.







2. Adjust the speed control actuator cable.
1 Make sure the throttle body cam is in the closed position.
2 Pull on the speed control actuator cable to remove any slack.
3 Back off the speed control actuator cable one notch.

NOTE:
- The speed control actuator cable must not be pulled tight for proper operation.
- The throttle body cam will automatically spring set to the closed position. The throttle body cam must be in the closed position.







3. Install the speed control actuator cable clip.
1 Hold the speed control actuator cable.
2 Insert the speed control actuator clip securely.