Four Wheel Drive Selector Switch: Service and Repair

Removal





1. Remove and reposition the center instrument panel finish panel.
1 Remove the screws.
2 Remove and reposition the instrument panel finish panel.





2. Disconnect the electrical connectors.
1 Disconnect the shift range selector switch electrical connector.
2 Disconnect the cigar lighter electrical connectors.





3. Disconnect the electrical connectors.
1 Disconnect the rear heated back light switch electrical connector.
2 Disconnect the rear wiper switch electrical connector (if so equipped).





4. Disconnect the radio electrical connector.





5. Remove the instrument panel finish panel.





6. Remove the shift range selector switch knob.





7. Remove the shift range selector.
1 Remove the screws.
2 Remove the switch.

Installation
1. Follow the removal procedure in reverse order.