Missing Weld Nut - Lower B-Pillar

1. Remove the interior trim panel to expose the suspect anchor point.
2. Obtain a M12 weld nut.
3. Drill two 8-mm (5/16-in) diameter holes adjacent to the clearance hole.
4. Align weld nut with the clearance hole using a piece of round stock.
5. Secure in place and using Rotunda MIG Wire Feed Welder 106-00053 or equivalent, plug weld at the two 8-mm (5/16-in) diameter holes previously drilled.
6. Metal finish as required.
7. Verify the nut is securely in place.