| Assembled Gear Face Runout | | 0.004 Inch (in) |
| Main Bearing Journal | Diameter 1, 2, 3 | 2.5190-2.5198 Inch (in) |
| Out-of-Round Limit | 0.0003 Inch (in) |
| Taper Limit | 0.0003 Inch (in) |
| Journal Runout Limit | 0.002 Inch (in) |
| Surface Finish (RMS) | 11.8 Micro-Inches (micro-in) |
| Thrust Bearing Journal | Length | 1.703-1.722 in |
| Connecting Rod Journal | Diameter | 2.3103-2.3111 Inch (in) |
| Out-of-Round Limit | 0.0003 Inch (in) |
| Taper Limit | 0.0003 Inch (in) |
| Surface Limit (RMS) | 11.8 Micro-Inches (micro-in) |
| Main Bearing Thrust Face | Surface Finish (RMS) | 0.354 Micro-Inches (micro-in) |
| Runout Limit | 0.001 Inch (in) |
| Crankshaft Endplay | | 0.004-0.008 Inch (in) |
| Clearance to Crankshaft | Desired | 0.001-0.0014 Inch (in) |
| Allowable | 0.0005-0.0023 Inch (in) |
| Bearing Wall Thickness | | 0.0959-0.0962 Inch (in) |
| Flywheel-to-Crankshaft Bolts | | 59 Foot Pound-Force (ft.lb) |
| Crankshaft main Bearing Bolts | Stage 1 | 37 Foot Pound-Force (ft.lb) |
| Stage 2 | Rotate an Additional 115-125 Degrees |