Retrieving Lamp Flash Codes (LFC)

The Restraints Control Module (RCM) monitors the Supplemental Restraint System (SRS) for possible faults. If a fault is detected while the ignition switch is in the RUN position, the RCM will illuminate the air bag indicator located in the instrument cluster.

When the ignition is cycled (turned OFF and then ON), the air bag indicator will remain lit for six seconds and then go out for two seconds. If an SRS fault exists, the air bag indicator will then flash a two digit Lamp Fault Code (LFC). The air bag indicator will flash the LFC five times, then it will remain illuminated for the rest of the key cycle. The RCM will also communicate the current and historical DTCs through the Data Link Connector (DLC), using the New Generation Star (NGS) Tester. If the air bag indicator does not function, and a system fault is detected, the RCM will signal the GEM to activate an audible chime. The chime is a series of five sets of five tone bursts. If the chime is heard, the SRS and the air bag indicator require repair.

LFCs are prioritized. If two or more faults occur at the same time, the fault having the highest priority will be displayed. After that fault has been corrected, the next highest priority fault will be displayed. Diagnostic Trouble Code Tests and Associated Procedures