Toe

1. Start the engine and center the steering wheel.

2. Turn the engine off, and hold the steering wheel in the "straight forward" position by attaching a rigid link from the steering wheel to the brake pedal.

3. Check the toe settings.





4. NOTE: Do not allow the steering gear bellows to twist when the front wheel spindle tie-rod is rotated.

Remove the clamps.





5. Loosen the nuts.
- Clean and lubricate the nut(s) and front wheel spindle tie-rod threads.





6. Rotate the front wheel spindle tie-rods.





7. Tighten the nuts.





8. Install the clamps.
9. Recheck the toe settings.