Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 1999 >> Taurus V6-3.0L DOHC VIN S >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Knock Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor: Service and Repair

Knock Sensor:






NOTE: The Knock Sensor (KS) is located on the RH side of the cylinder block.

REMOVAL
1. Disconnect battery ground cable.
2. Raise vehicle on hoist.
3. Disconnect engine control sensor wiring from knock sensor.
4. Remove heat shield boot from knock sensor.
5. Remove knock sensor from cylinder block.

INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten knock sensor to 15-20 N.m (11-14 Lb-Ft).
3. Install heat shield boot over knock sensor.
pro multis · About Operation CHARM