Crankshaft, Engine
| Main Bearing Journal | Diameter | 2.5190 - 2.5198 Inch (in) |
| Out-of-Round Limit | 0.0003 Inch (in) | |
| Taper Limit | 0.0006 Inch (in) TOTAL 0.008 mm (0.0003 in) per 25 mm (1 in). | |
| Journal Runout Limit | 0.002 Inch (in) | |
| Surface Finish (RMS) | 10.0 Micro-Inches (micro-in) | |
| Thrust Bearing Journal | Length | 1.0148 - 1.067 Inch (in) |
| Connecting Rod Journal | Diameter | 2.1253 - 2.1261 Inch (in) |
| Out-of-Round Limit | 0.0003 Inch (in) 0.015 mm (0.0006 in) TOTAL | |
| Taper Limit | 0.0003 Inch (in) | |
| Surface Limit (RMS) | 10.0 Inch (in) | |
| Crankshaft End Play | 0.004 - 0.008 Inch (in) | |
| Main Bearing Thrust Face | Surface Finish (RMS) - Front | 0.157 Inch (in) |
| Surface Finish (RMS) - Rear | 0.157 Inch (in) | |
| Runout Limit | 0.001 Inch (in) | |
| Main Bearings Clearance to Crankshaft | Desired | 0.001-0.0014 Inch (in) |
| Allowable | 0.00086-0.0027 Inch (in) | |
| Main Bearing Cap Bolts | 56-62 Foot Pound-Force (ft.lb) |