Crankshaft, Engine
| Main Bearing Journal Diameter | 67.482 - 67.504 Millimeter (mm) | |
| Maximum Out-of-Round | 0.0075 Millimeter (mm) Between Cross Sections | |
| Maximum Taper (Straightness) | 0.004 Inch (in) | |
| Runout FIM Of Center Journals When Located On Front And Rear Journal | 0.05 Millimeter (mm) 3 Places | |
| Clearance - Crankshaft Journal to Main Bearing Clearance | 0.048 - 0.024 Millimeter (mm) | |
| Connecting Rod Journal Diameter | 53.003 - 52.983 Millimeter (mm) | |
| Maximum Out-of-Round | 0.0075 Millimeter (mm) Between Cross Sections | |
| Maximum Taper | 0.004 Millimeter (mm) | |
| Crankshaft End Play | 0.075 - 0.377 Millimeter (mm) | |
| Big End Journal Inside Diameter with Assembled Liners | 53.049 - 53.027 Millimeter (mm) | |
| Rod Bearing to Journal Clearance | 0.064 - 0.026 Millimeter (mm) | |
| Crankshaft Main Bearing Bolts | Cross Mounted | Refer to Procedure |
| Vertical | Refer to Procedure |