Removal and Replacement

HEADLINER

Removal and Installation
1. Remove the visor and visor attaching clips.







2. Remove the windshield side garnish moulding.
- Pull at the top of the windshield side garnish moulding and work downward.

3. Remove the front safety belt tongue and retractor assemblies upper attachments.







4. Remove the left and right center body pillar upper finish panels.
- Pull at the top of the center body pillar upper finish panel and work downward.







5. Remove the first row of pushpins fastening the rear headliner.
6. Pull the front headliner from underneath the front door opening weatherstrips.







7. Remove the front headliner from the vehicle.
8. Disconnect the wire harness at the B-pillar.







9. Remove the coat hooks.
1. Remove the screw.
2. Remove the coat hook.







10. Remove the rear seat shoulder strap hook.
11. Remove the rear safety belt tongue and retractor assemblies upper attachments;







12. Remove the sliding door upper roller hinge trim cover, if equipped with the sliding door.
1. Remove the screw.
2. Remove the upper roller hinge trim cover.

13. Open the sliding door and loosen the sliding door upper garnish moulding, if so equipped.







14. Loosen the upper body side trim panels at the headliner.
- The left-hand upper front body side trim panel is shown.







15. Remove the rear cargo lamp;
16. Remove the rear headliner attaching pushpins.







17. Pull the headliner from underneath the door opening weatherstrips.
18. Remove the headliner from the vehicle.

Installation
1. Follow the removal procedure in reverse order.