RH

Removal
1. Disconnect the battery ground cable.
2. Remove the air cleaner assembly.
3. Remove the resonator assembly.





4. Remove the oil level indicator tube.
1. Remove the nut.
2. Pull upward and remove the tube.
5. Remove the engine cover.





6. Disconnect the fuel injector/glow plug jumper nine pin electrical connector.
1. Disconnect the retaining clip.
2. Disconnect the nine pin connector.





7. Remove the valve cover.
1. Remove the nut and the resonator bracket.
2. Remove the 10 bolts.
3. Remove the valve cover.





8. Remove the valve cover gasket.
1. Disconnect the four electrical leads from the glow plugs.
2. Disconnect the four electrical connectors from the fuel injectors, and remove the gasket.

Installation





1. Follow the removal procedure in reverse order.