Wiper Motor Linkage: Service and Repair

REMOVAL
1. Remove the windshield wiper pivot arms; refer to Wiper Arm.

NOTE: The windshield wiper mounting arm and pivot shaft is replaced as an assembly.

2. Remove the cowl top vent panels.







3. Disconnect the windshield wiper mounting arm and pivot shaft.
1. Remove the access cover from the dash panel.
2. Remove the retaining clip.
3. Disconnect the windshield wiper mounting arm and pivot shaft from the windshield wiper motor.







4. Remove the windshield wiper mounting arm and pivot shaft.
1. Remove the screws.
2. Remove the windshield wiper mounting arm and pivot shaft.

INSTALLATION







1. To install, reverse the removal procedure.