Front Seat Cushion, Heated Seat

REMOVAL
1. Remove the seat. For additional information, refer to Seat-Captain's Chair.
2. Remove the side shield.
3. Remove the seat track. For additional information refer to Seat Track-Excursion, Heated Seat.
4. Remove the heated seat module. For additional information, refer to Heated Seat Module-Excursion.







5. Disconnect the electrical connectors and remove the wire harness.







6. Remove the screws.







7. Unclip the lumbar control.







8. Unclip the J-clip.







9. Remove the bolts.







10. Separate the seat cushion from the seat backrest.

NOTE: Guide the lumbar cable through the seat cushion when separating the seat cushion from the seat backrest.

INSTALLATION
1. To install, reverse the removal procedure.
2. Check the restraint system for correct operation.