LH

Removal
1. Disconnect both battery ground cables.
2. Remove the charge air cooler outlet duct.
3. Remove the inlet duct, tube and bracket assembly.





4. Disconnect the fuel injector/glow plug nine pin connector.
1. Disconnect the retaining clip.
2. Disconnect the nine pin connector.





5. Disconnect the engine control sensor wiring.





6. Remove the valve cover.
1. Remove the ten bolts.
2. Remove the valve cover.





7. Disconnect the electrical connectors from the fuel injectors and the glow plugs.
1. Disconnect the four electrical leads from the glow plugs.
2. Disconnect the four electrical connectors from the fuel injectors.
^ Remove the valve cover gasket.

Installation





1. Follow the removal procedure in reverse order.