Lifter / Lash Adjuster, Valve
| Type | Hydraulic Roller Follower |
| Standard Diameter | 0.9209 - 0.9217 Inch (in) |
| Clearance To Bore | 0.0011 - 0.0034 Inch (in) Service limit- 0.005 |
| Hydraulic Lifter Leak-Down Rate | 18 - 90 Second (sec) Time required for plunger to move 0.125 inch under load of 50 lbs. with test fluid at room temperature. |
| Collapsed Tappet Gap (Clearance) | 0.185 Inch (in) Measured at valve tip to rocker arm. |
| Lifter Retaining Plate Retaining Bolt | 15 Foot Pound-Force (ft.lb) |