Crew Cab

Torx Bit Tool Set Used For T55 "Torx Plus" Bit:

SPECIAL SERVICE TOOL(S)

REMOVAL
1. Remove the utility tray, if necessary.







2. Remove the safety belt bolts.
1 Use the T-55 Torx bit to remove the safety belt buckle bolt.
2 Use the T-55 Torx bit to remove the safety belt tongue bolt.







3. Remove the safety belt.
1 Remove the safety belt buckle.
2 Remove the safety belt tongue.

INSTALLATION







1. Follow the removal procedure in reverse order.

NOTE:
^ Make sure the safety belt webbing is not twisted prior to installation.
^ Make sure to tighten nuts and bolts to specification.

2. Check the restraint system for correct operation.