Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> Excursion 4WD V8-7.3L DSL Turbo VIN F >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Seat >> Removal and Installation >> Front Bench
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Bench

REMOVAL
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the front safety belts from the front seat. For additional information, refer to Seat Belt Systems.







3. Remove the front seat.
1 Remove the two front seat riser support-to-floorpan bolts.
2 Remove the front seat riser-to-floorpan nuts.
3 Disconnect the safety belt electrical connector.
4 Remove the front seat.

NOTE: Removing the front seat requires more than one technician.

INSTALLATION







1. Follow the removal procedure in reverse order.
^ Adjust the seat to the full forward and rearward positions a few times to assure safety belt and buckle accessibility.
^ Make sure the safety belt webbing is not twisted prior to installation.

NOTE: When installing the seat, tighten the front mounting bolts, then the rear mounting nuts.

2. Check the restraint system for correct operation.
pro multis · About Operation CHARM